Installation

 




Place the panels in position exactly so that the tongue is immediately adjacent to the groove. Ensure that both panels are lying at the same level along their entire length.
The special form of the spring flanks will expand the opening of the groove a little when the panels are pushed together.
Once the spring has clicked into position in the groove the panels are joined together by the SNAP connection. The precision machining guarantees a perfect possible fitting.

ACTIVATE

Wet the tongue with water by using the Kaindl Aqua Applicator.
CONNECT

Push the panels easily with hammer and push-block together.
MERGE

The panels are firmly joined together due to the pre-glued Snap plus connection.